Rigging screws

Rigging screws DIN 82004

The surfaces of the rigging screws DIN 82004 are electro-galvanised. Available in: Type A with two oval eyes; Type B with two jaws; Type C with two round eyes; Type D with a jaw and round eye; and Type E with a jaw and oval eye.

Rigging screws DIN 82004

NOMINAL SIZE MAX LOAD
kN *)
a b1 b2 b3 c RIGHT AND LEFT-HANDED THREAD
d1
d2 d3 d4 l1 l2 l3 l4 l5 t ADJUSTABILITY
0,4 4 29 8 12 10 13 M 12 10 11,5 22 415 379 365 372 397 15 140
0,6 6,3 48 12 16 12 21 M 16 12 14 28 494 420 408 414 457 18 150
1 10 48 12 19 16 21 M 18 16 18 35 529 471 449 460 500 23 165
1,6 16 58 16 23 20 26 M 22 20 23 45 591 521 495 508 556 28 175
2 20 58 16 26 22 26 M 24 22 25 50 625 563 535 546 594 31 190
2,5 25 72 21 29 25 32 M 27 24 27 55 699 607 577 592 653 34 205
3 31,5 72 21 32 28 32 M 30 27 30 60 732 648 614 631 690 36 215
4 40 94 26 35 30 40 M 33 30 33 65 822 692 656 674 757 39 230
5 50 94 26 39 35 40 M 36 36 39 75 854 746 698 722 800 46 240
6 63 108 29 45 40 45 M 42 39 42 85 953 823 773 798 888 51 260
8 80 115 32 49 45 49 M 45 45 48 95 1.049 917 859 888 983 56 295
10 100 125 36 58 50 54 M 52 48 52 110 1.138 998 936 967 1.068 63 315
12 125 144 41 64 55 60 M 56 52 56 120 1.259 1.091 1.019 1.055 1.175 70 345
16 160 163 46 70 60 66 M 64 60 65 130 1.372 1.170 1.096 1.133 1.271 75 365
20 200 173 51 74 65 72 M 72 x 6 68 74 140 1.468 1.254 1.176 1.215 1.361 80 390
25 250 192 56 80 70 80 M 76 x 6 72 78 150 1.590 1.346 1.260 1.303 1.468 87 420
32 315 216 60 90 80 90 M 80 x 6 80 86 170 1.722 1.452 1.352 1.402 1.587 97 450

Measurements in mm *)
Conversion of the units for strength and breaking forces similar to DIN 1301 – 1 kp (kilopond) = 9.80665 N (Newton); 1 kN (kilo Newton) = 1000 N; 1 kp/mm2 = 9.80665 N/mm2

Rigging screws DIN 1478

The rigging screws are manufactured to a standard similar to DIN 1478. Equipped at both ends with jaws and lock nuts. Middle piece comprised of ST-52. The surface is electro-galvanised.

Rigging screws DIN 1478

d3 l1 l5 d4 b2 b3 ADJUSTABILITY NUT X PIN d3 WEIGHT PER PIECE IN KG kg/%
Hexagon bolt and nut according to (DIN 601) EN 24016
M 8 110 205 8 8 15 85 M 6 x 35 26
M 10 125 250 8 10 21 90 M 8 x 40 45
M 12 125 300 10 14 19 90 M 10 x 45 66
Bolt and nut according to DIN 20633
M 16 170 340 10 20 24 125 M 16 x 61,5 151
M 20 200 455 12 28 47 150 M 20 x 80 293
M 24 255 550 12 33 53 180 M 24 x 100,5 500
M 30 255 665 16 44 74 180 M 30 x 130,5 997

Rigging screws 1480

The rigging screws are made of drop forged mild steel and manufactured to a standard similar to DIN 1480. Can be equipped with eye and hook. The surface is electro-galvanised.

Rigging screws 1480

THREAD DIAMETER CLOSED LENGTH OPEN LENGTH BODY LENGTH LENGTH LENGTH THREAD LENGTH HOOK OPENING MATERIAL THICKNESS OUTER DIAMETER INNER DIAMETER OF EYE WEIGHT PER PIECE
a
mm
b
mm
c
mm
d
mm
e
mm
f
mm
g
mm
h
mm
i
mm
j
mm
k
mm
in kg
6 172 258 110 77 80 55 8 15 20 9 0,11
8 184 264 110 85 84 57 10,5 15 22 10 0,2
10 222 311 125 106 105 68 13 11 31 14 0,28
12 241 324 125 117 111 70 16 13 35 16 0,43
14 261 351 140 124 122 75 18 15 40 18 0,61
16 311 427 170 144 150 88 20 17 47 22 1
20 358 490 200 170 167 105 21 21 52 24 1,6
22 414 559 220 200 186 118 24 28 60 27 2,2
24 453 630 255 215 205 135 26 33 65 27 2,8
30 495 660 255 240 220 135 34 35 71 31 4,1
33 545 744 295 260 245 148 38 40 88 36 6
36 597 782 295 275 277 158 46 45 94 38 8,4

This rigging screw is also available with hook & hook or eye & eye.
Dimensions upon request.

Closed body rigging screws

The closed body rigging screws are made of mild steel. Equipped at both ends with jaws and lock nuts. They feature a 5x safety factor of WLL to the minimum break load. Surfaces are hot-dipped galvanised, except the end fittings of the 6 and 8 mm types, which are electro-galvanised.

Closed body rigging screws

THREAD DIAMETER BODY LENGTH CLOSED LENGTH OPEN LENGTH PIN DIAMETER INNER JAW LENGTH INNERE JAW WIDTH JAW WIDTH OUTER JAW DIAMETER WLL WEIGHT PER PIECE
a
mm
b
mm
c
mm
d
mm
e
mm
f
mm
g
mm
h
mm
j
mm
to in kg
6 100 175 255 5 19 7 20 13 0,2 0,16
8 108 199 282 6 25 9 24 14 0,32 0,27
10 125 222 320 8 26 10,5 28 19 0,5 0,45
12 195 320 479 10 32 13 34 22 0,7 0,86
16 230 388 572 12 39 18 42 28 1,2 1,57
20 270 454 672 16 46 20 51 33 1,5 2,67
22 295 490 730 20 55 25 55 38 2,2 3,68
24 325 558 819 22 63 30 70 46 3,2 5,3
33 370 681 977 30 85 38 82 60 4,8 12
39 400 710 1.017 33 86 45 85 76 6 14,2
45 400 760 1.050 39 105 50 100 86 8,5 20,8
48 400 820 1.110 45 120 58 118 92 11 24

Green Pin® Turnbuckles Jaw-Jaw

The Green Pin rigging screws are made of drop forged high-strength SAE 1035 or 1045 steel and manufactured to a standard similar to ASTM F1145-92, formerly U.S. Federal Specification FF-T-791b. Equipped with a jaw and lock nut on both ends. They feature a 5x safety factor of WLL to the minimum break load. Certificates are available upon request.

Green Pin® Turnbuckles Jaw-Jaw

THREAD DIAMETER MAX. OPNEING CLOSED LENGTH OPEN LENGTH INNERE JAW WIDTH INNER JAW LENGTH PIN DIAMETER SER MATERIAL STRENGTH OF EYE EYE DIAMETER WLL WEIGHT PER PIECE
a
Inch
Inch b
mm
c
mm
d
mm
e
mm
f
mm
g
mm
h
mm
to in kg
3/8 6 302 416 13 22 8 8 21 0,54 0,37
1/2 8 338 452 16 26 9,5 10 25 1 0,73
1/2 9 414 585 16 26 9,5 10 25 1 0,79
1/2 12 490 719 16 26 9,5 10 25 1 0,96
5/8 6 394 508 18 33 13 13 33 1,59 1,37
5/8 9 470 641 18 33 13 13 33 1,59 1,31
5/8 12 546 775 18 33 13 13 33 1,59 1,53
3/4 6 432 546 23 38 15,5 16 41 2,36 1,86
3/4 9 508 679 23 38 15,5 16 41 2,36 2,31
3/4 12 584 813 23 38 15,5 16 41 2,36 2,56
3/4 18 737 1.080 23 38 15,5 16 41 2,36 3,11
7/8 12 625 854 27 44 19 18 48 3,27 3,71
7/8 18 778 1.121 27 44 19 18 48 3,27 4,14
1 6 524 638 30 52 22 20 54 4,54 4,29
1 12 676 905 30 52 22 20 54 4,54 5,07
1 18 829 1.172 30 52 22 20 54 4,54 6,62
1 24 980 1.437 30 52 22 20 54 4,54 7,85
1 1/4 12 760 989 44 73 29 25 67 6,9 9,48
1 1/4 18 912 1.255 44 73 29 25 67 6,9 11,6
1 1/4 24 1.064 1.521 44 73 29 25 67 6,9 13
1 1/2 12 823 1.052 52 70 35 27 80 9,71 13,6
1 1/2 18 975 1.318 52 70 35 27 80 9,71 14,3
1 1/2 24 1.128 1.585 52 70 35 27 80 9,71 18,4
1 3/4 18 1.060 1.403 59 85 41 33 90 12,7 25
1 3/4 24 1.213 1.670 59 85 41 33 90 12,7 28,7
2 24 1.315 1.772 64 93 51 39 108 16,78 45,4
2 1/2 24 1.486 1.943 75 114 57 38 143 27,22 73
2 3/4 24 1.562 2.019 89 110 70 42 156 34,02 98

Green Pin® Turnbuckles Eye-Eye

The Green Pin rigging screws are made of drop forged high-strength SAE 1035 or 1045 steel and manufactured to a standard similar to ASTM F1145-92, formerly U.S. Federal Specification FF-T-791b. Equipped with an eye and lock nut on both ends. They feature a 5x safety factor of WLL to the minimum break load. Certificates are available upon request.

Green Pin® Turnbuckles Eye-Eye

THREAD DIAMETER MAX. OPENING CLOSED LENGTH OPEN LENGTH DIAMETER INNER EYE WIDTH INNER EYE LENGTH LENGTH WWL WEIGHT PER PIECE
a
Inch
Inch b
mm
c
mm
d
mm
e
mm
f
mm
g
mm
to in kg
3/8 6 302 416 9 13 28 65 0,54 0,32
1/2 8 338 452 12 18 36 80 1 0,66
1/2 9 414 585 12 18 36 80 1 0,76
1/2 12 490 719 12 18 36 80 1 0,91
5/8 6 394 508 14 21 43 98 1,59 1,07
5/8 9 470 641 14 21 43 98 1,59 1,31
5/8 12 546 775 14 21 43 98 1,59 1,71
5/8 6 432 546 17 25 53 113 2,36 1,65
3/4 9 508 679 17 25 53 113 2,36 1,95
3/4 12 584 813 17 25 53 113 2,36 2,3
3/4 18 737 1.080 17 25 53 113 2,36 2,85
7/8 12 625 854 20 31 59 118 3,27 3,33
7/8 18 778 1.121 20 31 59 118 3,27 4,24
1 6 524 638 22 36 74 155 4,54 3,87
1 12 676 905 22 36 74 155 4,54 5,09
1 18 829 1.172 22 36 74 155 4,54 6
1 24 980 1.437 22 36 74 155 4,54 7,52
1 1/4 12 760 989 29 45 88 197 6,9 8,12
1 1/4 18 912 1.255 29 45 88 197 6,9 10,4
1 1/4 24 1.064 1.521 29 45 88 197 6,9 12,1
1 1/2 12 823 1.052 32 54 105 215 9,71 12,7
1 1/2 18 975 1.318 32 54 105 215 9,71 15,1
1 1/2 24 1.128 1.585 32 54 105 215 9,71 17,1
1 3/4 18 1.060 1.403 38 60 119 254 12,7 23,1
1 3/4 24 1.213 1.670 38 60 119 254 12,7 26,3
2 24 1.315 1.772 45 69 146 308 16,78 40,7
2 1/2 24 1.486 1.943 51 79 165 344 27,22 64
2 3/4 24 1.562 2.019 57 83 178 381 34,02 88

BREMERHAVEN SITE

Tecklenborg Kegel GmbH
Herwigstraße 36
27572 Bremerhaven
Germany
Directions

Tel: +49 (0)471 / 9 31 83 - 0
E-Mail: info@tecklenborg-kegel.de

WISMAR SITE

Tecklenborg Kegel GmbH
Schiffbauerdamm 20
23966 Wismar
Germany
Directions

Tel: +49 (0)3841 / 32770-0
E-Mail: info@tecklenborg-kegel.de